Halton KVE-WW User Manual

30 pages

To Next Page

Operators Manual

Operation, Maintenance and Service

Capture Jet

Hoods with Water Wash

Model:

KVE-WW, KVC-WW

Questions and Answers:

B
Brandi GuerreroJul 31, 2025
What to do if there is a low airflow alarm in my Halton KVE-WW?
- S
  Stacey MartinJul 31, 2025
  If you're experiencing a low airflow alarm with your Halton Ventilation Hood, here are a few things to check: 1. Ensure the fan speed is sufficient to reach the designed airflow. 2. Verify that the plastic tubing is properly connected to both the Accuflow device and the TAB port; reconnect if necessary. 3. Inspect the plastic tubing for any damage; replace it if broken. 4. Check the TAB port in the exhaust plenum for dirt or blockage; clean it if needed.
S
Stephanie RiveraAug 14, 2025
How to fix no lights illuminated on AccuFlow device in Halton Ventilation Hood?
- T
  Tara GriffinAug 14, 2025
  If the lights on your AccuFlow device aren't illuminating, the issue might be with the electrical connections. Verify all electrical connections are properly connected. Reconnect them if needed.

Halton KVE-WW Specifications

General

Brand	Halton
Model	KVE-WW
Category	Ventilation Hood
Language	English

Summary

System Overview and General Information

General Description of Capture Jet Hoods

Overview of Halton Capture Jet hood systems and their applications.

Inspection and Handling Recommendations

Guidance on inspecting units for shipping damage and notifying carriers.

General Installation Requirements

Responsibilities of the installing contractor and adherence to local codes.

Exhaust Airflow Determination

Information on determining exhaust airflow rates based on lab conditions.

Installation Instructions

System Operation and Maintenance

System Operation and Airflow Balancing

How to check and balance airflows and use the KSA filter remover tool.

Hood Cleaning and Maintenance

Instructions for cleaning the hood canopy, filters, and grease cups.

Backsplash Installation Details

Insulated Backsplash Assembly Installation

Diagram and notes for installing an insulated backsplash assembly.

Flat Sheet Backsplash Assembly Installation

Diagram and notes for installing a flat sheet backsplash assembly.

Typical Hood Installation Details

Recommended Exhaust Duct Installation

Splice Strip / U-Channel Assemblies

Closure Panel Assembly

Exhaust Fire Damper Assembly

Standard Switch Panel Wiring

Capture Jet Fan System Installation and Wiring

Capture Jet Fan Package Installation

Details on the integrated Capture Jet fan package and its components.

Capture Jet Fan System Wiring Diagram

Wiring diagram for the Capture Jet fan system with Halton supplied switch panel.

T.A.B. TM - Testing and Balancing Ports

Halton AccuFlow Airflow Monitoring System

AccuFlow System Overview

Description of the AccuFlow device for monitoring exhaust airflow and providing alarms.

AccuFlow Operation, Alarms, and Programming

How the AccuFlow is programmed, its operational modes, and alarm indicators.

AccuFlow Troubleshooting Guide

Common problems, their probable causes, and solutions for the AccuFlow device.

KSA Filter Management

KSA Filter Removal and Installation with KFR Tool

Instructions for assembling and using the KFR tool for filter removal and installation.

Model-Specific Installation Examples

KVE-WW Model Typical Installation Diagram

Illustrates the typical installation of the KVE-WW model hood.

KVC-WW Model Typical Installation Diagram

Illustrates the typical installation of the KVC-WW model hood.

Control Panel Features

Control Panel Components and Mounting

Control Panel Component Descriptions

Description of components like valves, pump, gauges, and PLC within the control panel.

Control Panel Mounting Methods

Guidelines for recessed and surface mounting the control panel.

Control Panel Operation

Control Panel Display, Alarms, and Layout

Description of system status indicator lights, display, and panel layout.

Standard Control Panel Diagram

Diagram showing the layout and dimensions of the standard control panel.

Control Panel Inputs and Outputs

Control Panel Input/Output Terminal Descriptions

Details on fire switch, remote control, and outputs for fans and solenoids.

Front Panel Appearance

Front Panel Indicator Lights and Display

Description of system status indicator lights and the TD 200 display.

Front Panel Touch Button Functions

Explanation of the soft touch buttons for setting wash times.

Operating Modes

Off Mode Operation

System status and outputs when the unit is in OFF mode.

Run Mode Operation

System status and outputs when the unit is in RUN mode.

Wash Mode Sequence of Operation

Step-by-step sequence of operations for the wash cycle.

System Settings and Fire Safety

Viewing and Clearing System Statistics

Procedure for viewing and clearing system statistics and changing wash time.

Fan Operation During Fire Events

Default fan behavior when the unit detects a fire event.

Field Wiring Diagram

Electrical Wiring and Connections

Control Panel Electrical Wiring Diagram

Detailed wiring diagram for the control panel.

HC5-25-EFO-S Wiring Diagram Details

Specific wiring diagram for the HC5-25-EFO-S model.

Troubleshooting Guide

Troubleshooting Inoperative Components

Common issues for exhaust fan and solenoid not functioning, with causes and solutions.

Halton Limited Warranty

Related product manuals

Halton KVF Capture Jet