Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
Supply Plenum (on F models)
Exhaust Plenum
Capture Jet
Lights
• Perferated front face panels allows laminar flow of make-up air into the kitchen
• Supply air damper is adjusted during commissioning only to balance air between multiple hood sections�
• Comfort Nozzles allow some of the supply air to be directed down onto the chef to provide them with a more comfortable work
environment
• Make up air supplied at low level velocity through the face of the canopy improve capture and containment by a further 10%
• KSA cyclonic particulate separation filters are the primary exhaust air treatment
• Exhaust Air Slide Damper is adjusted during commissioning only to balance air between multiple hood sections
• T�A�B� points allow easy periodic checking of the exhaust fan’s suction pressure
• Halton Capture Jet Hoods have a row of horizontal and vertical jet holes along the front and open sides of the canopy� The capture jets
produce controlled air curtains that capture and spiral the air toward the filters, improving capture� The air is drawn into the Capture Jet
by special fans and speed controllers in the hood
• The light box is mounted in the flat top section of the exhaust hood� A hinged glass door provides access to the lights
Optional: Down lights (LED or halogen) are fitted into stainless steel spring loaded fittings
Introduction
KSA FIlter
Exhaust Air
Slide Damper
Spring Latch
Exhaust Canopy
Silicone Gasket
To Next Page
Loading...
