22
14.3 Stopping the alarm/ Snooze function
Alarm tone (Buzz)
• When the alarm activates, press [VOLUME/POWER], to
stop the alarm.
• Repeatedly press [SNOOZE] on the remote control to
activate snooze mode.
• The alarm turns off for the selected time interval
(5/10/15/30/60 minutes) before activating once again.
Internet radio
• When the alarm activates, press [VOLUME/POWER] to
stop the alarm.
• Repeatedly press [SNOOZE] on the remote control to
activate snooze mode.
• The alarm turns off for the selected time interval
(5/10/15/30/60 minutes) before activating once again.
• Repeatedly press [SNOOZE] on the remote control to
activate ON instead of snooze mode. The radio now
stays switched on.
• If the alarm is not stopped, the radio automatically
switches into standby mode after one hour.
15. System settings
You can modify all settings and access important
information about the radio in the System settings.
15.1 Equaliser
The equaliser allows you to adjust the sound of the radio
to suit your preferences by amplifying or reducing the
amount of bass or treble in the audio .
You can choose from precongured proles, adjusted to
suit a variety of music genr
es, or cr
eate your own custom
prole.
• To set the Equaliser, proceed as follows:
[ ]
System settings
Equaliser
• Use [ENTER/NAVIGATE] to choose one of the
precongured proles.
• To create your own equaliser prole, choose the option
My EQ prole setup.
• This takes you to the settings for Bass, Treble and
Loudness (volume amplication).
• To adjust a particular value, press [ENTER/NAVIGATE]
at the corresponding menu item and then change the
value by turning [ENTER/NAVIGATE]. If playback is
already started when you modify these settings, you can
hear the changes in the audio immediately.
• Conrm your settings by pressing [ENTER/NAVIGATE]
once more.
• Complete the conguration process by pressing [
] on
the device and conrm the saving of settings by pressing
[ENTER/NAVIGATE].
• To use the new prole, choose the item My EQ.
To Next Page
Loading...
