Hama IR150MBT User Manual

28
15.6 Software update
We are constantly developing new software features
and improvements for our radios to x problems, add
functionality, etc.
We recommend that you keep your radio’s software up to
date.
• Proceed as follows:
[ ]
System settings

Software update
• Set Auto-check setting to YES to have the radio
automatically check for new software updates at regular
intervals. (Recommendation)
• Choose Check now to manually start a check for
software updates.
Warning
• Make sure that the radio has a stable power supply
before you start a software update.
• Power supply failure during a software update can
cause irreparable damage to the radio.
15.7 Setup wizard
You can restart the setup wizard (Setup wizard) at any
time by proceeding as follows:
[ ]
System settings

Setup wizard
15.8 Info
• To have the radio display current information about
its hardware and software (version numbers, device
designation, radio ID, etc.), proceed as follows:
[ ]
System settings

Info
• If you have already registered your radio
on the online portal of Frontier Silicon
(http://www.wiradio-frontier.com), then
you can nd out the radio ID there, as well.

Hama IR150MBT Specifications

General

Quantity	1
Security algorithms	WEP, WPA, WPA2, WPS
Apple docking compatibility	Not supported
Number of batteries included	2 pc(s)
Satellite speakers RMS power	20 W
Radio type	Internet
Tuner type	Digital
Preset stations quantity	40
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Projection	-
Thermometer	No
Product color	Black
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Subwoofer driver diameter (imperial)	4 \
Display type	TFT
Display resolution	320 x 240 pixels
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
RMS rated power	90 W