Hama IR150MBT User Manual

29
15.9 Backlight
The backlight can be con gured for each operating
mode (Operation Mode, Standby Mode, Slumber Mode)
separately.
Proceed as follows:
[ ]
System settings

Backlight
• For the operation modes Operation Mode and
Slumber mode, select between various brightness
levels.
• For Standby Mode, you may also choose a brightness
level for the backlight when the radio is in standby
(Standby Level). Alternatively, you can set the backlight
to turn off completely in standby (Standby Level 
Off).
• Choose a time interval for Timeout. When the radio is
in standby, press [ENTER/NAVIGATE] to illuminate the
display at the brightness level set for that operating
mode for the selected interval of time.
• Alternatively, you can disable this feature (Timeout 
Off).
Alternatively, press [
] on the remote control to directly
adjust the backlight setting for the current operating mode.
16. UNDOK – everything in the palm of your hand
The UNDOK app, developed by Frontier Silicon, gives you
full control of radios and speakers from your smartphone.
Whether you are setting up the device for the rst time,
specifying settings for the equaliser and multi-room, or
managing your favourite stations – the UNDOK app lets
you access all the features from your smartphone or tablet,
thereby offering you greater convenience.
16.1 First-time setup of the device with UNDOK
Note
A detailed description of the UNDOK app and
the full scope of functions can be found in our
UNDOK guide at:
www.hama.com -
>
00054850 -
>
Downloads
The rst time you switch on an UNDOK-enabled product
from Hama, or when you have set it to the factory settings,
it creates a micro access point – a separate Wi-Fi network
that you can connect to with your tablet or smartphone.

Hama IR150MBT Specifications

General

Quantity	1
Security algorithms	WEP, WPA, WPA2, WPS
Apple docking compatibility	Not supported
Number of batteries included	2 pc(s)
Satellite speakers RMS power	20 W
Radio type	Internet
Tuner type	Digital
Preset stations quantity	40
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Projection	-
Thermometer	No
Product color	Black
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Subwoofer driver diameter (imperial)	4 \
Display type	TFT
Display resolution	320 x 240 pixels
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
RMS rated power	90 W