105
HA<O>
XK-5
Owner’s Playing Guide
⓭ PATCH LOAD - REVERB (B)
Allows you to select whether to load Reverb parameters.
NOTE: Parameters 1, 3 and 5 are Patch Parameters and are recorded to each Patch. They are lost unless you save the patch.
NOTE: Each Patch Load parameter (B) is a Bank Parameter. Bank Parameters are common for each Patch in the current Bank and are
recorded when the value is set.
u PRESET KEYS
⓮ PRESET KEY - HOLD (G)
is allows you to set the time for the Patch to be actually recalled, by holding down the Preset Key.
e setting range is 0.0 -- 1.0 [sec].
⓯ FAVORITE -SWITCH (G)
is allows you to set whether or not to use the Favorite function of the Preset Keys.
OFF: Each of the Preset Keys C-C -- A-A corresponds with the Patches U00 -- U99 respectively.
If you press the Preset Key holding down the [RECORD] Touch Button, the Patch is recorded.
ON: The Preset Key recalls the Patch in accordance with the Favorite Table.
If you press a Preset Key while holding the [RECORD] Touch Button, it is associated between current Patch and the Preset key on the Favorite Table.
u FAVORITE
is is for displaying and changing the Patch referred to for each Preset Key.
⓰ UPPER BANK (G), ⓱ UPPER KEY (G), ⓲ UPPER PATCH (G)
⓳ LOWER BANK(G), ⓴ LOWER KEY (G), ㉑ LOWER PATCH (G)
First select the BANK ⓰/⓳ and KEY ⓱/⓴ of the Preset Keys you want to associate then select the PATCH ⓲/㉑.
You can also locate these pages by holding down each of the Preset Keys [C] -- [A] for a certain length of time.
NOTE: These parameters are Global Parameters and are common for each Patch. For a complete listing of all Global Parameters,
please consult the APPENDIX at the back of this Guide.
To Next Page
Loading...
Need help?
General
