EasyManua.ls Logo

HANGCHA CPD30J - CPD10;15;20;25;30;35 JC1, C2 & CPD40;45;50 J C2 Fork Electrical Systems

HANGCHA CPD30J
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
6.2 CPD10/15/20/25/30/35J C1CPD10/15/18/20/25/30/35J C2CPD40/45/50J C2
fork
6.2.1 Summarize
CURTIS company procreates controller adopt international advanced closed loop system and
advanced control techniqueDesigning large screen instrumentcan clear display ―electric quantity
―speed‖total time of run ‖ and so on informationDesignation adopt code plus character manner
increase maintain efficiencyFour work models can be set through meter so as to suitable for different
condition.
1Actuating motor
Actuating motor adopt three-phase alternating current frequency conversion electromotorincrease
conversion efficiencynot have commentator brush in order not to maintenance
2Lift motor
Lift motor JC1 is direct current motor, so is the motor of J series truck. Lift motor JC2 adopts
three-phase alternating electromotorincrease conversion efficiencynot have commentator brush in
order not to maintenance.
3SAFETY & PROTECTION FEATURES
Reverse Polarity of the battery
Connection errors
All inputs are protected against connections errors.
Current overload protection
it have detecting elementcontrol peak current.
Thermal protection
If the controller temperature exceeds 8C, the maximum current reduces in proportion to the
thermal increase. The temperature can never exceed 115°C.
If the electric machinery temperature exceeds 145°C, the maximum current reduces in proportion to the
thermal increase. The temperature can never exceed 165°C.
Low Battery charge
When the battery charge is low, the maximum current is reduced proportionally to the battery
discharge.
External Agents
Electric control is hermetical .The chopper is protected against dust and spray of liquid to
economy.
Protection against accidental Start Up
A precise sequence of operations is necessary before the machine will start. Operation can not
commence if these operations are not carried out correctly. Requests for drive must be made after
closing the Key Switch.
4OPERATIONAL FEATURES
Feedback control system make the vehicle speed follow accelerator whether low speed or not

Related product manuals