7
GOOGLE™ is a registered trademark of Google, Inc. HANNA instruments
®
has no affiliation with Google™, Inc.
iButton
®
is a registered trademark of Maxim/Dallas Semiconductor Corp.
conductivity, chloride, nitrate, ammonium and temperature with data logging.
The system is easy to setup and easy to use.
The HI 98290 with GPS option has a built-in 12 channel GPS receiver and
antenna that guarantees a position accuracy of 10 m (30 ft).
Measurements from specific locations are tracked with detailed coordinate
information that can be viewed immediately on the display.
GPS information can be transferred to a PC using HANNA’s HI 929829
software. GPS information can also be viewed using a GPS mapping software
such as Google™ Maps. Clicking on visited locations using a mapping software
displays the measurement information.
All HI 9829 are equipped with Fast Tracker™ an invaluable tool for associating
measurements with their locations. HANNA’s exclusive Fast Tracker™—T.I.S. (Tag
ID System) uses
iButton
®
s that can be installed at any number of sampling sites.
The HI 9829 features a graphic, backlit display that automatically sizes the
digits to fit the screen with on-screen graphing capability. Each parameter is fully
configurable.
HI 9829 was designed to withstand harsh environments and is the ideal solu-
tion for field measurements of lakes, rivers and sea.
The meter meets IP67 standards (30 minute immersion at a depth of 1 m) and
the multisensor probe meets IP68 standards (continuous immersion in water).
Settings and logged data can be protected with a passcode to avoid unautho-
rized modifications and context-sensitive help is always available.
Main features of the HI 9829 system:
• Rugged meter and probe
• Easy to use
• Measure up to 16 parameters and display of up to 12 parameters
• Tracking of measurement locations with GPS (optional)
• Waterproof protection (IP67 for the meter and IP68 for the probe)
• Exclusive Fast Tracker™—T.I.S. (Tag ID System)
• Graphic LCD with backlight
• Built-in barometer for D.O. concentration compensation
• Quick calibration feature
• Measurement check to eliminate any erroneous readings
• Autorecognition of probe and sensors
• Log-on-demand and automatic logging (up to 45,000 samples) on meter for
all parameters
• Graphical display of logged data
To Next Page
Loading...
Need help?
General
