46
Chapter 9 - STATUS
Useful information regarding the meter, probe (if connected) and GLP
calibration data are available for viewing by selecting “Status” from
the main menu.
Select “Meter Status” to display information related to the battery,
logging, internal temperature, password, Meter ID, serial number and
firmware version.
Press / to scroll through the status screens.
Press ESC to return to the “Status” menu.
Select “Probe Status” to display information related to the probe type, connected sensors, Probe ID,
serial number and firmware version.
• Press / to scroll through the status screens.
• Press ESC to return to the “Status” menu.
Note: The probe status screen will automatically be displayed when the probe sensor
status has changed. If this occurs, the “Measurement Screen” and “Parameter Selection”
softkeys are available (see Meter Initialization).
METER STATUS
PROBE STATUS
To Next Page
Loading...
Need help?
General
