49
Temperature
• From the “GLP” menu select the “Temperature”option.
• Data regarding the last temperature calibration will be
displayed: calibrated point, time and date.
• Use the / keys to scroll through the stored data for the
last 5 calibrations.
Notes: If no user temperature calibration has been performed or if calibration was cleared
using the “Restore factory calib.” option the offset value is set to default, and the message
”Factory calibration” is displayed. Press ESC to return to the previous screen.
Atmospheric Pressure
• From the “GLP” menu select “Atm. pressure”.
• Data regarding the last atmospheric pressure calibration will
be displayed: custom calibration point, time and date.
• Use the / keys to scroll through the stored data for the
last 5 calibrations.
Notes: If no atmospheric pressure calibration has been performed or if calibration was
cleared using the “Restore factory calib.” option the offset value is set to default, and the
message ”Factory calibration” is displayed. Press ESC to return to the previous screen.
GLP DATA
Chapter 10 - LOGGING MODE
The HI9819X and the corresponding probe offer many logging options that can be combined based
on user needs. The following figures describe the available logging options.
LOGGING MODE
To Next Page
Loading...
Need help?
General
