Parameter Setting Method
EN
Copyright © Qingdao Hantek Electronics Co., LTD DPO7000 Quick Guide
21
7 Parameter Setting Method
The parameter setting method of this series of oscilloscopes supports two methods:
numeric keyboard input and multi-functional knob setting of values.
1、 For parameters on the menu, rotate the multi-functional knob V0 in the button area
to select parameter items or modify parameter values.
2、 After clicking on the parameters on the menu, a numeric keyboard will pop up on
the screen, as shown in the following figure.
In the numeric keypad, you can use the touch screen function to enter values or units by
clicking on them. After entering all numerical values and selecting the desired units, the
numeric keypad will automatically close to complete the parameter settings. In addition,
after completing the numerical input, you can also directly click the in the
numeric keyboard to close it, and the units of the parameters are the default units. In the
numeric keypad, you can also perform the following operations:
⚫ Delete the entered parameter values.
⚫ Set the parameters to maximum or minimum values.
⚫ Set the parameters to default values.
⚫ Clear the parameter input box.
3、 For parameters on the menu, click the menu label button directly to switch settings.
To Next Page
Loading...
