Need help?Do you have a question about the Hantek Hantek2D82Auto and is the answer not in the manual?
General| Bandwidth | 80 MHz |
|---|---|
| Channels | 2 |
| Vertical Resolution | 8 bits |
| Trigger Modes | Edge, Pulse, Video, Slope, Alternative |
| Multimeter | Yes |
| Vertical Sensitivity | 2 mV/div to 10 V/div |
| Time Base Range | 5 ns/div to 1000 s/div |
| Display | 7 inch TFT LCD |
| DMM Functions | Resistance, Capacitance, Diode, Continuity |
| Power Supply | 100V-240V AC, 50/60Hz |
| Interfaces | USB Host, USB Device, LAN |
| Input Impedance | 1 MΩ ± 2% |
| Supported Interfaces | USB |
Essential safety guidelines to prevent injury and product damage, covering maintenance, power, grounding, and operation.
Covers essential initial steps including inspection, safety keyhole use, bracket adjustment, front panel, user interface, functional check, and probe check.
Detailed checks for shipping container, accessories, and the instrument itself upon receipt.
Steps for powering the device on/off, checking battery status, and performing a basic waveform observation.
Safety warnings to prevent electric shock while handling and connecting probes.
Detailed steps to manually adjust probe compensation for accurate measurements.
Configuring trigger source (CH1/CH2), slope (rising/falling), and trigger modes (Auto/Normal/Single).
Using Force Trigger for acquisition and adjusting the trigger level for stable waveform display.
Instructions for enabling and using cursors to measure time and voltage parameters of signals.
Steps for running the self-calibration routine to optimize measurement accuracy.
Description of the digital multimeter interface and its measurement types.
Procedure for measuring DC and AC voltage using the DMM function.
Steps for measuring DC/AC current, resistance, and capacitance using the DMM.
Procedure for testing diodes using the multimeter function.
Using the buzzer for continuity checks and the data hold function to freeze readings.
Solutions for issues like the oscilloscope not starting up or no waveforms displayed.
Guidance for resolving distorted waveforms or continuous rolling without triggering.
To Next Page
