Need help?Do you have a question about the Hantek HT360 Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Frequency Range | 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz |
| Duty Cycle Range | 0.1%~99.9% |
Legal statement regarding document ownership, modification rights, and reliability.
Information on product compliance with national industry standards and CE certification.
Details on how to contact Hantek for services and support.
Guidelines for safe operation and handling to prevent injury and equipment damage.
Defines warning symbols and terms used in the manual for safety communication.
Specifies operating temperature, humidity, altitude, and environmental conditions.
Instructions for regular maintenance and proper cleaning procedures for the instrument.
Information on product compliance with WEEE Directive and equipment recycling.
Details the capabilities and specifications of the HT360 series Leeb hardness tester.
Explains keys, menu text, operating steps, and document content conventions used in the manual.
Covers initial checks, physical features, setup procedures, and safety lock.
Details impact device types, sample preparation, and coupling for accurate measurements.
Step-by-step guide for booting, loading, and performing measurements.
Overview of device panels, user interface, and battery management.
Explains the measurement screen elements and the step-by-step measurement process.
Details system configuration options and the instrument calibration procedure.
Covers saving data, viewing information, printing, and firmware upgrades.
Instructions for downloading and installing the companion software for PC connection.
Description of the PC software's user interface and control functions.
Solutions for screen not displaying, or display being too dark or unclear.
Troubleshooting steps when the instrument does not display measured values.
Reference table for material types and their corresponding impact device compatibility.
Data correlating Leeb hardness values with material strength (σb).
Detailed specifications for different impact devices, including energy, mass, and dimensions.
Diagrams and specifications for special-shaped support rings for various surfaces.
List of standard accessories, optional items, and order information for the hardness tester.
Overview of the product warranty terms, conditions, and Hantek's liabilities.
To Next Page
