Quick Start
EN
Copyright©Qingdao Hantek Electronics Co.,LTD HT360 series user manual
9
4 Quick Start
4.1 General inspection
Check the transport package
After receiving the hardness tester, users should check the equipment according to the
following steps: check whether there is any damage caused by transportation: if the
packaging carton or foam plastic protective pad is seriously damaged, please keep it
until the whole machine and accessories pass the electrical and mechanical tests.
Check the accessories
The details of the accessories provided are described in "Appendix A: Accessories and
Options" at the end of this manual. If the accessories are found missing or damaged,
please contact the dealer responsible for this business.
Check the whole machine
If the appearance of the instrument is damaged, the instrument does not work properly,
or fails to pass the performance test, please contact the dealer in charge of this
business.
4.2 Appearance and dimension
Figure 41 Front view and side view
To Next Page
Loading...
Need help?
General
