HT2018B(C) Battery System Tester 13
3) Then prompt to enter the license plate number, test date / number. If you do not need
to record, press the <ESC> button to skip.
4）After setting up, press <ENTER> or <ESC> button to print.
5) After printing, the instrument will return to battery startup test.
5.7 Language
Press <ESC> and <ENTER> two buttons at the same time and power up. Or after power
up, and press <ESC> and <ENTER> two buttons more than one second. The device will
enter the language switching interface. Press < > < > button to select language, then
press <ENTER> button to enter the test interface, or press <ESC> button to exit.
Report Printing?
Yes No
To Next Page
Loading...
