3 - Description
21
TurboFiller
Before use
• Push the handle (arrow) to unlock.
• Grab the handle to pull TurboFiller down until it clicks into locked
down-position.
After use
• Push the handle (arrow) to unlock.
• Grab the handle to push TurboFiller back in storing position until it
locks.
±
WARNING! Before releasing the lock (arrow) always keep a hand
on the grip to avoid abrupt movement of the TurboFiller!
The TurboFiller valves and Chemical Container Rinsing lever are placed
on the backside (arrow).
TurboFiller suction valve
The valve is used simultaneously with the TurboFiller. The valve has 2
settings: Push the valve lever down to get a quick suction out of the
hopper. Lift the lever to lock it in the open position for continuous
suction from the hopper into the main tank. Open the valve when
chemicals are going to be filled into the TurboFiller
TurboDeflector valve
This TurboDeflector valve activates the Vortex flushing of the TurboFiller.
The valve has 2 settings: Push the valve lever down to get a quick flush
of the hopper. Lift the lever to lock it in open position for continuous
liquid rotation in the hopper.
Chemical Container Rinsing lever
The rinsing lever is used for two purposes:
When the TurboFiller lid is open: For rinsing empty containers. Place the
container over the rotating flushing nozzle in the middle of the
TurboFiller to rinse the inside of the container.
When the TurboFiller lid is closed: Use the Chemical Container Rinsing
lever to rinse the hopper after the filling of chemicals is completed.
€
DANGER! Do not press the lever unless the multi-hole nozzle is covered by a container or the TurboFiller lid is closed
to avoid spray liquid hitting the operator.
Suction from TurboFiller
Start TurboDeflector
Chemical Container Rinsing
To Next Page
Loading...
Need help?
General
