3
HARDI MEGA 230 / 350 CENTRIFUGAL OPERATORS MANUAL
TABLE OF CONTENTS: Continued
6.0 OPERATING INSTRUCTIONS (cont'd)
6.8 Operation of the ESC Controls 33
6.9 Agitation Adjustment 35
6.10 Manifold System 36
6.11 Manifold System Operating Instructions 38
6.12 Agitation Bypass Valve Operation (Optional) 39
6.13 Operation of the Tank Drain Valve 39
6.14 Nozzle Selection 41
6.15 Calibration 44
7.0 MAINTENANCE 48
7.1 Cleaning the Sprayer 48
7.2 Filters 50
7.3 Lubrication 51
7.4 Greasing the H-Frame & Center Frame 52
7.5 Greasing the Boom 53
7.6 Lubrication of Chain & Sprocket 54
7.7 Greasing the Breakaway Clutch 54
7.8 Maintenance of Triplets 55
8.0 ADJUSTMENTS 56
8.1 Adjustment & Maintenance Intervals 56
8.2 Checking and Adjusting Sprocket Timing 57
8.3 Aligning Wing Assemblies 57
8.4 Aligning Intermediate and Outer Boom Sections 58
8.5 Adjusting Front Fold Cables 59
8.6 Adjusting Breakaway Clutch Tension 60
8.7 Adjusting Boom Wing to be Level 61
8.8 Adjusting Floating Frame Pivots 63
8.9 Adjusting Boom Transport Postion 64
8.10 Adjusting Rear Cable 64
9.0 WINTER STORAGE 65
10.0 OPERATIONAL PROBLEMS 66
10.1 Nozzle Tubes and Fittings 67
10.2 Checking the Valve Cone in Distributor Valves 67
To Next Page
Loading...
