Hardi New NAVIGATOR 1100 User Manual

47HARDI
®
New NAVIGATOR OPERATOR’S MANUAL
FAULT
System will not fl ush (pump,
control, and boom)
System will fl ush, but not
rinse.
Rinse nozzle has poor
output.
PROBABLE CAUSE
Various
Rinse valve
Various
CONTROL/REMEDY
Flush valve not in correct position.
P.T.O. not engaged
Rinse valve not in correct position.
Bad fl ush valve or suction side air leak.
Rinse valve not in correct position.
Chemical fi ller pressure selection not in
correct position (if so equipped.
Flush & Rinse™ System problems
Troubleshooting
FAULT
Filler hopper will not empty.
Filler hopper empties too
slow.
Filler hopper backfi lls when
bottom tank discharge valve
is open.
PROBABLE CAUSE
Various
Various
Various
CONTROL/REMEDY
Pressure selection valve not in correct po si tion.
Sprayer pump not running.
Bottom tank discharge valve not open all the way.
Restrictor cone from pump supply not the cor-
rect size: Black - 1302 & 363 pump
White - 463 pump
Restrictor cone from pump supply not the cor-
rect size: Black - 1302 & 363 pump
White - 463 pump
Restrictor cone missing.
Restrictor cone on wrong side of the valve.
Pump not at full r.p.m.
Chemical Filler problems

Hardi New NAVIGATOR 1100 Specifications

General

Brand	Hardi
Model	New NAVIGATOR 1100
Category	Paint Sprayer
Language	English