Harman Kardon AVR 1700 - Specifications; Audio Section Specifications; Video Section Specifications; General Specifications

AVR
29
English
Specifications
Specifications
Audio Section
Stereo power: 100W per channel,
two channels driven
@6/8 ohms,
1kHz, <1.0% THD
Multichannel power: 95W per channel, two
channels driven @ 8
ohms, 20Hz – 20kHz,
<0.07% THD
Input sensitivity/impedance: 250mV/27k ohms
Signal-to-noise ratio (IHF-A): 100dB
Surround system adjacent-channel separation: Dolby Pro Logic/PLII:
40dB
Dolby Digital: 55dB
DTS: 55dB
Frequency response: 10Hz – 100kHz
High instantaneous-current capability (HCC): ±34 amps
Transient intermodulation distortion (TIM): Unmeasurable
FM Tuner Section
Frequency range: 87.5 – 108.0MHz
Usable sensitivity IHF: 1.3µV/13.2dBf
Signal-to-noise ratio (mono/stereo): 70dB/68dB
Distortion (mono/stereo): 0.2%/0.3%
Stereo separation: 40dB @ 1kHz
Selectivity (±400kHz): 70dB
Image rejection: 80dB
IF rejection: 80dB
AM Tuner Section
Frequency range: 520kHz – 1720kHz
(AVR 1700)
522kHz – 1620kHz
(AVR 170/AVR
170/230C)
Signal-to-noise ratio: 38dB
Usable sensitivity (loop): 500µV
Distortion (1kHz, 50% mod): 1.0%
Selectivity (±10kHz): 30dB
Video Section
Television format: NTSC (AVR 1700);
PAL (AVR 170/AVR 170/230C)
Input level/impedance: 1Vp-p/75 ohms
Output level/impedance: 1Vp-p/75 ohms
Video frequency response (composite video): 10Hz – 8MHz (–3dB)
HDMI: witn 3D and 12-bit Deep Color
General Specifications
Power requirement: 120V AC/60Hz
(AVR 1700);
220V – 240V AC/50Hz
(AVR 170)
Power consumption (maximum): 260W (AVR 1700);
240W (AVR 170/AVR 170/230C)
Dimensions (W x H x D): 17-5/16" x 6-1/2" x 13-13/16"
(440mm x 165mm x 350mm)
Weight 12.8 lb (5.8kg)