• Extensive use of the programming, learning and
configuration functions of the remote may consume
significantly more battery power than normal remote
operation. While the batteries should last for four to
six months in normal operation, you may find that
they need to be changed sooner after the remote is
programmed for the first time.
• When the batteries approach a level below which
the remote will not function, the remote’s LCD
screen will display a
LOW BATTERY warning,
as shown in Figure 92. We strongly recommend
replacing the batteries as soon as this message
appears to avoid the loss of programming and
configuration settings. These settings are
not
lost
when the batteries are changed quickly.
Figure 92
58 CONFIGURING THE REMOTE
CONFIGURING THE REMOTE
HKP1445AVR645om 6/7/06 6:36 PM Page 58
To Next Page
Loading...
