Vehicle Harness
Lift Harness
Connect power
to the lift
Vehicle Harness
Lift Harness
Connect power
to the lift
14
SECTION 2 : INSTALLER
Preparation
4. Connect power to the lift. [Figure 14-1] Insert and turn key.
Press ‘DOWN’ to extend the lift. [Figure 14-2]
Figure 14-1
Figure 1
4-3
Figure 14-2
Figure 16-4
5. When extended 3” or more ip up to
vertical. [Figure 14-3]
6. Align the outer tube with hitch post
or swing-away (as shown) using the
power of the lift. The lift will slide on the
cardboard box. [Figure 14-4]
| www.harmar.com | 800-833-0478
To Next Page
Loading...
