Harmar Mobility AL350 - Hitch Post Mount

5"-12"
12"-14"
14"-16"
16"-18"
FIND PROPER
ORIENTATION
X
5"-12"
12"-14"
14"-16"
16"-18"
FIND PROPER
ORIENTATION
X
CLASS 2
1/2" Hex
Nyloc Nut
THREADED HOLE
CLASS 3
PINCH
BOLT
TUBE
1/2" Hex
Nyloc Nut
HHCS,
1/2-13x3-1/2or 4""
Presses Hitch Adapter
againstreceiverwall
eliminatingrattles,
andliftmovement
HHCS,
1/2-13x3"
FULLY THREADED
CLASS 2
1/2" Hex
Nyloc Nut
THREADED HOLE
CLASS 3
PINCH
BOLT
TUBE
1/2" Hex
Nyloc Nut
HHCS,
1/2-13x3-1/2or 4""
Presses Hitch Adapter
againstreceiverwall
eliminatingrattles,
andliftmovement
HHCS,
1/2-13x3"
FULLY THREADED
21
SECTION 2 : INSTALLER
Installation
Figure 21-1
Figure 2
1-2
INSTALLATION WITH HITCH POST
OPTIMIZING HITCH HEIGHT
Y
ou can vary the lift height
by changing the Hitch
Adapter’s location.
This
helps you
o
p
t
i
m
ize the vehicle’s
ground clearance to
ensure that the platform
lays flat when it reaches
the end of its travel.
Consult Figure 21-1 to
select the orientation
needed for the vehicle
based on the Hitch
Height, the vehicle’s
hitch receiver distance
to the ground.
Refer to pages 13 &
14 for an overview of
the procedure.
AL350 Hitch-Mounted Scooter and Power Chair Lift P/N: 610-00065 Rev A