EasyManua.ls Logo

Harmony V7 - Preparing Child Restraint for Use

Harmony V7
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26

: The shoulder harness must be  
  the child’s shoulders. If the upper
most harness posion is below the child’s shoulders,
 use this child restraint with harness.
 the harness height is correct for your child’s
size. .
:   use this child restraint if the
midpoint of your child’s head is above the top of the
child restraint.
     

:
With the child restraint installed
with the UAS or vehicle seat
belt, ghten the Top Tether strap
securely by pulling on the free end
of the Top Tether strap ❷.
To loosen, press the Top Tether
release buon ❸.
: Ensure that tether strap
is  twisted.
Incorrect use of the harness system is the most
common mistake people make. It is  important
to read, understand and follow  instrucons and
warnings.   mistake comfort for safety. The
harness system must be snugly adjusted at all mes.
!

Table of Contents

Related product manuals