27
1. Loosen harness system by pushing
the up-front metal harness
adjuster at the front of the seat
just above the adjustment strap
❶ and simultaneously pulling the
chest strap towards you ❷.
2. Turn seat around so that you have
easy access to the rear of the child
restraint backrest.
3. Follow the shoulder straps down
along the back unl they meet at
the metal splier plate.
4. Remove each end of harness strap
from splier plate ❸.
5. Slide harness strap ends out
through front of backrest, and
reinsert back through at desired
height ❹. Check that straps are
not twisted. that both
straps are inserted into the same
height slots on each side of the
seat.
6. Reassemble harness straps onto metal splier plate
ensuring that the straps are twisted. Pull on
harness to make sure it is secure.
.
❹
❸
Place your child in the child restraint with their back at
against the backrest:
1. Take note of the shoulder harness slots at or
immediately above their shoulders. This child
restraint has three (3) harness height posions.
2. Take note of the crotch slot at or immediately in front
of your child.
❷
❶
To Next Page
Loading...
