Harmony V7 - Installing Shoulder Belt Guide

43
8.  that the belts do not press on the child’s esh
or push the child’s body into an unnatural posion.
9. Do the same for all unused vehicle seat belts.
10. Adjust the vehicle belt’s shoulder secon to ensure
that shoulder belt lies across child’s shoulder and
chest, and  across child’s face or neck.
      

     . If the belt does not lie
properly across the child’s shoulder and chest, the
shoulder belt guide clip  be used to ensure
proper placement (see “Using shoulder belt guide”,
pg. 44).
Teach your child that seat belts are not toys and should
 be played with, regardless of whether the car is
in moon or not.
 be aware of what your children are doing in
the back seat.

1. Locate the shoulder belt guide
strap and screw in the storage
pouch.
2. Using a Phillips Screwdriver, aach
belt guide strap to booster seat
base by screwing into the pre-
drilled hole in the back of the seat
base.
Before ghtening screw, make sure belt strap is
poinng upwards and that the  belt guide opening
is facing forward.  overghten screw.



