Harmony V7 - Using Shoulder Belt Guide; Removing Shoulder Belt Guide; Removing;Installing Fabric Seat Cover


Fabric covers can  be removed once the harness
system has been removed (see “Removing/Installing
harness”, pg. 37 - #1 and #2).
:
1. Unsnap backrest fabric snaps (x2) along the sides of
the backrest.
2. Locate elasc fabric loops (x2) along boom of seat

44
1. Slide the vehicle’s shoulder belt
into the  clip ensuring it is at.
Posion the belt guide just above
the child’s shoulder ❶.
   
    
.

.
All straps be ght and twisted.  slack
 be removed from lap and shoulder porons
of the vehicle belt to ensure a snug t. 

.
❶



1. Remove vehicle seat belt from  belt guide clip.
2. Unscrew shoulder belt guide from the back of the
seat base.
It is recommended to store the unused shoulder belt
guide along with any other parts from the child restraint
for future use.
