EasyManua.ls Logo

Harmony V7 - SECURING CHILD IN THE CHILD RESTRAINT

Harmony V7
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
and simultaneously pull the
chest strap towards you ❸.
3. Unbuckle harness straps by
pressing on the  buckle release
buon and by pulling the buckle
clips out ❹. Move harness straps
to the side.
4. Place child in child restraint with
child’s back at against back of the
backrest.
5. Place harness straps over child’s
shoulders and insert harness clips
into buckle unl they click’ into
place ❺.
 that harness clips and
buckle are properly fastened by
gently tugging on each.
 that the straps are 
twisted.
  use child restraint if
harness does not lock.
6. Re-fasten chest clip ❻.
7. Tighten harness system by pulling
on the up-front harness adjuster
strap unl all slack is removed
from the system ❼.
 straps are at against
child’s shoulders and thighs. You
should  be able to slide more
than one nger between the strap

Table of Contents

Related product manuals