To Next Page
M
Michael JohnsonJul 31, 2025
What to do if the CPU failed on my Harris Intraplex STL-160 Multiplexer?
- JJames Simpson DDSJul 31, 2025
If the Harris Multiplexer CPU has failed, replace the module with a spare.
What to do if the CPU failed on my Harris Intraplex STL-160 Multiplexer?
If the Harris Multiplexer CPU has failed, replace the module with a spare.
What to do if there is a loss of receive signal on my Harris Intraplex STL-160 Multiplexer?
If the Harris Multiplexer is experiencing a loss of receive signal, contact your T1 carrier to verify that the T1 circuit is operating.
What to do if the signal is present but out-of-frame on my Harris Intraplex STL-160 Multiplexer?
If the Harris Multiplexer is showing a signal present but out-of-frame, contact your T1 carrier to find out what kind of frame format is in use on the T1 circuit and ensure that this format is set correctly on the multiplexers at both ends of the T1 circuit.
What to do if my Harris Intraplex STL-160 Multiplexer is receiving a yellow alarm?
If the Harris Multiplexer is showing a yellow alarm, contact your T1 carrier to resolve the problem.
What to do if my Harris Multiplexer is receiving alarm indication signal?
If the Harris Multiplexer is showing an alarm indication signal, contact your T1 carrier to resolve the problem.
How to fix no transmit output on Harris Multiplexer?
If the Harris Multiplexer has no transmit output, replace it with a spare.
Explains the functions of the ACS-160/STL-160 multiplexer components.
Details the operational functions of the CM-5RB common module.
Provides guidelines for wiring power and connectors.
Describes the CM-5RB module's basic configuration menu structure.
Describes the methods to access the multiplexer system remotely.
Details how to use ISiCL for configuring and operating the multiplexer.
Introduces internal functions for testing and troubleshooting.
Presents a general approach to troubleshooting ACS-160 systems.
General| Type | Multiplexer |
|---|---|
| Audio Channels | 16 |
| Audio Format | AES3, Analog |
| Transmission Medium | Copper, Fiber |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Channels | 16 |
| Interfaces | Ethernet |
| Gain | Adjustable |
| Operating Temperature | 0°C to 50°C |
