ACS-160 Series & STL-160 Series T1 Multiplexer Installation & Operation 5 – Remote Control
Version 2.11, August 2011
5-12 Harris Corporation
Intraplex Products
Figure 5-10. Pass-through Configuration
The required time slot mapping for CrossConnect A is
● Receive port 1, time slot 24 mapped to transmit port 2, time slot 24
● Receive port 2, time slot 24 mapped to transmit port 3, time slot 24
● Receive port 3, time slot 24 mapped to transmit port 4, time slot 24
● Receive port 4, time slot 24 mapped to transmit port 5, time slot 24
● Receive port 5, time slot 24 mapped to transmit port 6, time slot 24
To Next Page
Loading...