Need help?Do you have a question about the Harris HMX6803+ and is the answer not in the manual?
General| Operating Temperature | -40°C to +85°C |
|---|---|
| Connector Type | SMA |
| Type | Multiplexer |
| Interface | RF |
| Number of Channels | 6 |
| Insertion Loss | 1.5 dB max |
| Isolation | 60 dB min |
| VSWR | 1.5:1 maximum |
Describes the HMX6803+ and OP+HMX+ modules, their features, and capabilities.
Details front module, controls, LEDs, and monitoring.
Covers back connectors, breakout/serial cables, and the signal path diagram.
Guides for unpacking, checking lists, choosing upgrades, and selecting baluns.
Covers jumper settings, frame power, module installation, and fiber optic connection handling.
Steps for updating the module's firmware.
Operating notes, thumbnail streaming, and activating functions.
Covers audio test tones, embedding modes, errors, mono embedding, and V-fade.
Seamless sound, test patterns, Dolby-E alignment, delay, A/V alignment, and metadata.
Managing parameters via card-edge/CCS, LEDs, alarms, and factory defaults.
Details for SDI, AES/DARS inputs and SDI outputs.
Covers laser output, optical ports, serial, delay, power, and temperature.
Introduction to bit manipulation.
Explains manipulation of V-bits and U-bits.
Information on audio sampling frequency and word length.
General laser safety, precautions for enclosed/unenclosed systems, and labels.
Provides solutions for software and hardware communication problems.
To Next Page