HMX6803+ and OP+HMX+ Installation and Operation Manual 3
Copyright © 2009, Harris Corporation
Chapter 1: Introduction
OP+HMX+ Module Types
Table 1-1 describes the different versions of the OP+HMX+ product. The basic
module outputs through an SC/PC connector. Hardware upgrade options are
listed in
Table 1-2.
Hardware Options
All OP+HMX+ modules are shipped with standard SC/PC fiber connectors.
Other connectors are available (see
Table 1-2).
Table 1-1. OP+HMX+ Modules
Module Name Description
OP+HMX+13D Fiber transmitter set at 1310 nm
OP+HMX+CxxD Fiber transmitter set at CWDM wavelength
of 1xx0 nm
Table 1-2. Available Connectors
Item Description
OP+OPT+SC SC/PC fiber optic connectors (standard)
OP+OPT+ST ST/PC fiber optic connectors (optional)
OP+OPT+FC FC/PC fiber optic connectors (optional)
To Next Page
Loading...