2 HMX6803+ and OP+HMX+ Installation and Operation Manual
Copyright © 2009, Harris Corporation
Chapter 1: Introduction
• Four AES audio
• DARS input (unbalanced, balanced compatible with external balun)
•Outputs
• Four serial digital SMPTE 292M/259M SDI processed outputs
• One RS-232/RS-422 serial connector to embed metadata
• 10-bit video processing in the following standards and frame rates:
• Standard definition 525/625
• 1080psf (progressive segmented frame), 23.98/24 Hz
• 1080i (interlaced), 25/29.97/30 Hz
• 1080p (progressive), 23.98/24/25/29.97/30 Hz
• 720p (progressive), 50/59.94/60 Hz
• Up to 50 frames of SD video delay, up to 11 frames of HD video delay
• Auto-detect or user-forced input video standard with HD/SD-SDI auto
sensing
• AFD/WSS/VI detector and inserter
• Seamless sound functionality
• V-fading of the output audio on source audio change
• Automatic cable equalization
• Embed on black or grey on loss of video mode
• Video processing amplifier with luminance gain/offset and chrominance
gain/offset controls
• 16-, 20-, or 24-bit audio processing
• Shadowed/restored parameter settings when switching video standards
• Card-edge control and monitoring
• Serial and Ethernet remote control and monitoring
• Video and audio test signal generators
Optional Features
OP+HMX+ has an optional fiber transmitter.
HMX68OPT+AES8 adds four balanced or unbalanced AES inputs, for a total
of eight.
The HMX68OPT+3G upgrade option adds 10-bit video processing with 1080p
(progressive) video standard at 50/59.94/60 Hz frame rates as per SMPTE
424M.
To Next Page
