Harris HMX6803+ - Input and Output Signal Specifications

66 HMX6803+ and OP+HMX+ Installation and Operation Manual
Copyright © 2009, Harris Corporation
Chapter 4: Specifications
Inputs
SDI Video Inputs
Note
3G HD-SDI video input specifications only apply if you have installed a
HMX68OPT-3G license key.
Table 4-1. SDI Video Inputs
Item
3G HD-SDI
Specification
1.5G HD-SDI
Specification
SD-SDI Specification
Number 1 1 1
Standard 1080p (SMPTE 424M)
• 1080i/p (SMPTE 274M)
• 720p (SMPTE 296M)
SMPTE 259M-C, 270 Mbps,
525/625 component
Connector BNC (IEC169-8) BNC (IEC169-8) BNC (IEC169-8)
Impedance 75Ω 75Ω 75Ω
Frame rate
• 1080p: 50, 59.94, 60 Hz • 1080i/p: 23.98, 24, 25, 29.97,
30 Hz
• 720p: 50, 59.94, 60 Hz
• 525: 59.94 Hz
•625: 50 Hz
Return loss
• > 15 dB from 5 MHz to
1485 MHz
• >10 dB from 1485 MHz to
2970 MHz
> 15 dB from 5 MHz
to 1485 MHz
> 15 dB up to 270 MHz
Equalization Adaptive cable equalization
for up to 230 ft (70 m)
(typical) of Belden 1694A
coaxial cable
Adaptive cable equalization for
up to 492 ft (150 m) (typical) of
Belden 1694A coaxial cable
Adaptive cable equalization
for up to 984 ft (300 m)
(typical) of Belden 8281
coaxial cable