HMX6803+ and OP+HMX+ Installation and Operation Manual 13
Copyright © 2009, Harris Corporation
Chapter 2
Installation
Unpacking the Module
Before you install modules, perform the following:
• Check the equipment for any visible damage that may have occurred during
transit.
• Confirm receipt of all items on the packing list. See “Checking the Packing
List” for more information.
Contact your Customer Service representative if parts are missing or
damaged.
• Remove the anti-static shipping pouch, if present, and all other packaging
material.
• Retain the original packaging materials for possible re-use.
See “Unpacking/Shipping Information” on page ix for information about
returning a product for servicing.
To Next Page
Loading...