Harris M5300 - Table 4-5: Options and Accessories for CH-721 Control Heads

MM-015371-001, Rev. C
26
Table 4-4: Additional Options and Accessories for M5300 and M7300 Mobile Radios
PART NUMBER DESCRIPTION ILLUSTRATION
CN-014756
Connector, RF; TNC Male Crimp-
Type for RG58U, RG58A/U and
RGU400 Coaxial Cable
Table 4-5: Options and Accessories for CH-721 Control Heads
PART NUMBER DESCRIPTION
CA-009562-006 Cable, CAN; 6 feet, Right-Angle and Straight Connectors
CA-011854-001 Cable, CH-721 Option
CA-104861 Cable, CH-721 Programming
MAMROS0075-N1210 Cable, DC Power; 12-AWG, 10-Foot, Straight Connector
MAMROS0075-R1210 Cable, DC Power; 12-AWG, 10-Foot, Right-Angle Connector
MACDOS0012
Kit, Control Head Pedestal Mounting. Includes Pedestal Mount and Mounting
Screws.
MACDOS0013-CN004
Kit, Speaker; 20-Watt. Includes 6-Inch Cable MAMROS0034-NN006 (Straight
Connector)
MC-101616-040
(Discontinued; replaced by
MC-101616-041)
Microphone, Standard with Conxall Flush-Mount 45-Degree Connector
MC-101616-041
Microphone, Standard with Conxall Flush-Mount 90-Degree Connector
(Included with catalog numbers MAHK-NMC7Z and MAMW-NMC7Z)
MC-103334-040
Microphone, DTMF with Conxall Flush-Mount 45-Degree Connector
(Included with catalog number MAHK-NMC9C and MAMW-NMC9C)
MC-103334-041
(See footnote
5
)
Microphone, DTMF with Conxall Flush-Mount 90-Degree Connector
MC-103334-050
Microphone, Noise-Canceling with Conxall Flush-Mount 45-Degree Connector
(Included with catalog numbers MAHK-NMC9D and MAMW-NMC9D)
MC-103334-051
(See footnote
5
)
Microphone, Noise-Canceling with Conxall Flush-Mount 90-Degree Connector
344A4678P1 Microphone Hanger (One included with each microphone catalog option)
5
As of the publication of this manual, microphones MC-103334-041 and MC-103334-051 are not available. These two
mics have 90-degree connectors (also called “straight connectors”). See Section 3.3 for additional information.