MM-015371-001, Rev. C
65
13.4 SERIAL PROGRAMMING CABLES CA-013671-010 AND -020
Serial Programming Cable CA-013671-010 (10 feet long) and CA-013671-020 (20 feet long) can be used
to program and configure the M5300/M7300 mobile radio via a Personal Computer (PC). This cable has a
female DB-9 connector on one end for connection to the PC’s serial port and a male DB-9 connector on
the other end for connection to the serial port on the rear of the radio. The cable’s assembly and wiring
diagrams are shown in Figure 13-4 below.
If the utilized PC is not eq
uipped with a DB-9 serial port connector, the use of a suitable adapter will be
required, such as USB-to-RS-232 Adapter Cable CN24741-0001.
(Made From PS-CA-013671 Rev. -)
Figure 13-4: Programming Cables CA-013671-010 and CA-013671-020
To Next Page
Loading...
