MM-015371-001, Rev. C
64
13.3 ACCESSORY CABLE 19B802554P24
Accessory Cable 19B802554P24 is required when making headset and/or portable radio connections as
described in Section 11 of this manual. As illustrated in Figure 11-1 (page 55) and Figure 11-2 (page 57),
this cable’s male
DB-25 connector, identified P1, mates to the female DB-25 connector of Headset
Adapter Cable CA-012349-002. The cable’s round 8-pin waterproof connector, identified P2, mates to
the motorcycle harness Y-cable. In non-M5300/M7300 applications, Accessory Cable 19B802554P24
also supports connections to an external siren and light system via its connector J1.
=
NOTES:
=
=
0.6
eters
(23.6 inches)
1.75 meters
(68.9 inches)
(Made From 19B802554 Rev. AD, Sh. 24)
Figure 13-3: Accessory Cable 19B802554P24
To Next Page
Loading...
