Harris M5300 - Headset Adapter Cable Ca-012349-002; Figure 13-2: Headset Adapter Cable CA-012349-002

MM-015371-001, Rev. C
63
13.2 HEADSET ADAPTER CABLE CA-012349-002
As described in Section 11 of this manual, Headset Adapter Cable CA-012349-002 is required to connect
a headset or a portable radio (via belt box) to the M5300/M7300 mobile radio. The cable’s assembly
diagram is shown in Figure 13-2 below.
The cable’s male 44-pin D-sub
miniature (DB-44) connector, identified P1, mates with the female DB-44
connector on the rear of the radio.
The cable’s female DB-25 connector, identified J1, mates to the male DB-25 connector of Accessory
Cable 19B802554P24. Refer to Section 11 for additional information. Accessory Cable 19B802554P24
is illustrated in Section 13.3 that follows.
ASSEMBLY DIAGRAM
WIRING DIAGRAM
PARTS LIST
(Made From PS-CA-012349 Rev. A)
Figure 13-2: Headset Adapter Cable CA-012349-002