MM-015371-001, Rev. C
27
Table 4-6: Headset-Related Options for Use with M5300 and M7300 Mobile Radios
CATALOG NUMBER DESCRIPTION
SM-KA-13
Kit, Helmet Headset, External-Mount with One Speaker and Noise-Canceling
Microphone
SM-KA-23
Kit, Helmet Headset, External-Mount with Two Speakers and Noise-Canceling
Microphone
SM-KA11-FG
Kit, Half-Helmet Headset, Seer 1608, with One Speaker and Noise-Canceling
Microphone
SM-KA21-FG
Kit, Half-Helmet Headset, Seer 1608, with Two Speakers and Noise-Canceling
Microphone
SM-MCK-71GT Cable, Headset Helmet Kit Interface, with Pushbutton PTT Switch (Kawasaki
®
)
SM-MCK-72GT
Cable, Headset Helmet Kit Interface, with Rocker PTT Switch and Channel Guard
Disable Switch (Kawasaki)
SM-MCH-71GT
Cable, Headset Helmet Kit Interface, with Pushbutton PTT Switch (Harley-
Davidson
®
)
SM-MCH-72GT
Cable, Headset Helmet Kit Interface, with Rocker PTT Switch and Channel Guard
Disable Switch (Harley-Davidson)
SM-MCH-73GT
Cable, Headset Helmet Kit Interface, with Rocker/PTT/PA Switch and Channel
Guard Disable Switch (Harley-Davidson)
SM-25-0694 Cable, Extender, Helmet to Harness
SM-CA-3G5 Assembly, Belt Box Cable, JAGUAR™ 700P/Pi and P7100
IP
SM-CA-3GY Assembly, Belt Box Cable, LPE-200™
SM-CA-3GV Assembly, Belt Box Cable, M-RK™
CA-012349-002 Cable, Headset Adapter
19B802554P24 Cable, Accessory
4.6 MATERIALS NOT SUPPLIED
The following is a non-inclusive list of typical materials that are not supplied with a standard radio
equipment package, but will be required to complete the radio installation:
Motorcycle’s Radio Bracket (sometimes referred to as an “Interface Bracket”) — Typical type shown
in Figure 5-2.
Control Head’
s Adapter Bracket — See Figure 8-4
Miscellaneou
s Hardware for Securing Brackets to Motorcycle
Nylon Wire/Cable Ties
To Next Page
Loading...
