Harris XL-185P User Manual

G1 SCBA Radio Pairing Guide | Harris
G1 SCBA Radio Pairing Guide for
Harris® XL-185P | XL-200P
Harris XL-185P | XL-200P Configuration Settings 2
Creating a G1 SCBA Configuration Tag (for Bluetooth Pair Save Preferences) 5
Creating a Harris XL-185P | XL-200P Radio Pairing Tag 6
Pairing a G1 SCBA and Harris XL-185P | XL-200P Radio 8
Using the G1 SCBA and Harris XL-185P | XL-200P Radio 10
Clearing Radio Pair Info from the G1 SCBA 11
Clearing SCBA Pairing Info from the Harris XL-185P | XL-200P Radio 12
Troubleshooting 13

Harris XL-185P Specifications

General

Power Output	5W
Battery Life	Up to 24 hours
Weight	1.4 lbs
GPS	Yes
Bluetooth	Yes
Wi-Fi	No
Waterproof	Yes
Operating Temperature	-30°C to +60°C
Frequency Range	136-174 MHz
Modes	Analog, Digital
Encryption	AES
Display	Color LCD

Summary

Harris XL-185P | XL-200P Configuration Settings

Prepare Radio Personality Manager

Obtain and open RPM2 software, connect radio, and load personality.

Configure Radio Name and Personality

Adjust Audio and Microphone Settings

Configure audio, PTT, and Bluetooth microphone settings for the radio.

Configure Bluetooth and Program Buttons

Pair G1 SCBA with Harris Radio

Verify Radio Bluetooth Status

Make Radio Bluetooth Discoverable

Set the radio to be discoverable for pairing.

Register Radio to SCBA

Apply the radio pairing tag to the G1 SCBA's RFID target.

Accept Passkey and Complete Pairing

Confirm the passkey on the radio and finalize the pairing process.

Using Paired G1 SCBA and Harris Radio

Turn on G1 SCBA

Begin Breathing to Connect

Start breathing to automatically connect the SCBA and radio.

Troubleshooting Guide

Audio Issues

Addresses intermittent audio and poor audio quality problems.

Pairing and Connectivity Issues

Covers problems related to radio pairing and Bluetooth connectivity.