Need help?Do you have a question about the Harris P7300 SERIES and is the answer not in the manual?
General| Brand | Harris |
|---|---|
| Model | P7300 SERIES |
| Category | Portable Radio |
| Language | English |
Outlines FCC RF exposure limits and guidelines for occupational use.
Discusses potential interference with other devices and environments.
Provides advice on antenna placement, handling, and general usage for optimal performance.
Guidelines for maintaining and replacing the radio's antenna.
Precautions regarding RF energy affecting electronic devices.
Safety rules for using the radio on aircraft.
Safety precautions for using radios in explosive atmospheres and near blasting caps.
Steps for conditioning NiMH, NiCd, and Lithium battery packs.
Recommended practices for charging battery packs.
Guidelines to optimize battery runtime and shift life.
Procedures for removing and attaching battery packs to the radio.
Safety and environmental guidelines for disposing of rechargeable batteries.
Details the radio's resistance to adverse environmental conditions.
Describes the UDC for connecting external accessories like headsets.
Emphasizes using Harris authorized accessories for FCC compliance.
Steps to change the radio's operating mode from OTP to ECP.
Steps to change the radio's operating mode from ECP to OTP.
Details the radio's buttons, knobs, switches, and their functions in OpenSky mode.
Explains the functions of the P7350 and P7370 model keypads.
Details the P7300's 3-line display structure and content.
Defines the meaning of various status icons displayed on the radio.
Explains the color changes of the LED to indicate radio status.
Procedures for logging into the OpenSky network, including auto-registration.
Procedure to de-register the radio from the OpenSky network.
Explains how personalities define profiles and Talk Groups for OpenSky communication.
Defines Talk Groups and explains the OpenSky display overview.
Lists and describes the audible alert tones used by the radio.
Illustrates the P7300 OpenSky menu structure and usage notes.
Details various menu options for controlling radio functions.
Lists and describes error messages displayed during OpenSky operation.
Lists and describes special commands performable via the keypad.
Explains quick key sequences, DTMF overdial, and keypad locking.
Explains DTMF, changing active profiles, and selected talk groups.
Details adjusting display brightness and operating in stealth mode.
Adjusting side tone audio level and changing radio operating modes.
Steps for handling incoming and outgoing voice communications.
How to adjust the audio treble level for received signals.
Steps to lock out and unlock specific talk groups.
How to choose scan modes (Normal, None, Fixed) and manage duration.
How to set scan priority and use the Scan Mode A/B switch.
How to initiate selective calls using manual dialing or quick keys.
Using speed dial, accepting, and understanding selective call status messages.
How to send and receive pre-programmed text messages via selective alerts.
Steps for sending messages using keypad or menu and receiving/deleting alerts.
Instructions for initiating telephone interconnect calls.
How the radio handles emergency alerts and calls for user safety.
Procedures for declaring, receiving, and dismissing emergency calls.
How to clear emergencies and an overview of OpenSky encryption.
Details automatic and manual encryption processes in OpenSky.
Methods for transmitting pre-programmed status messages via keypad or menu.
How to send short service messages using the RTT feature.
Procedures for site lock and viewing GPS coordinates.
Introduction to XCOV, XCOV-TG, and XCOV-PROF modes.
Details on changing coverage modes and their operational limitations.
Instructions for using XCOV and XCOV-TG modes.
How to use XCOV-PROF and Scene-of-Incident modes.
Steps for powering on the P7300 portable radio.
Identifies and describes the radio's buttons, knobs, and switches.
Detailed explanation of the functions of each button, knob, and switch.
Explains the primary and secondary functions of the P7350 keypad.
Explains the primary and secondary functions of the P7370 keypad.
Describes the structure and content of the P7300 radio display.
Defines the meaning of various status icons shown on the display.
Explains the function of the tri-color LED for indicating radio status.
Lists and describes various status messages displayed during operation.
Lists and describes error messages indicating programming or service issues.
Explains alert tones and the voice annunciation feature.
Methods for selecting systems using control knob or keypad.
Procedures for selecting groups/channels and modifying scan lists.
Accessing the menu, scrolling options, and selecting parameters.
How to adjust backlight, contrast, and lock/unlock the keypad.
Procedures for declaring an emergency and adjusting high/low power.
Displaying keys, zeroing keys, and understanding encryption.
Procedures for receiving/transmitting encrypted calls and turning scan on/off.
Steps for adding groups or channels to the scan list for P7350/P7370.
How to remove groups or channels from the scan list.
How to perform nuisance delete and overview of system scan.
Details on Wide Area, Priority System, and ProScan scanning.
How to receive and declare emergency calls.
Explains the features and configuration of stealth mode.
Steps for handling incoming individual calls and responding.
Procedures for sending individual calls and managing call storage lists.
How to handle incoming telephone interconnect calls.
Steps for initiating telephone interconnect calls using pre-stored numbers.
How to direct dial phone numbers and use DTMF for overdialing.
Steps to store numbers in special call lists using the keypad.
How to transmit status conditions using methods 1 or 2.
Steps for transmitting messages using the Message Operation.
Procedures for dynamic regrouping and macro key usage.
How data calls are handled in EDACS and P25 modes.
Details on data displays, enabling/disabling data, exiting data calls, and scan lockout.
How data lockout mode affects scan operation.
Details on Type 99 signaling, modes, and resetting after calls.
How to reset Type 99 and use the audio playback feature.
Steps for sending pre-defined text messages via Radio TextLink.
How to view/delete TextLink messages and view GPS information.
Overview of Control and Status Services for MDTs and FES.
Periodic testing requirements for watertight integrity of immersible radios.
How to obtain technical support for the P7300 radio.
Common radio issues and their solutions.
How to contact Harris Customer Care for support and replacements.
Contact details for technical support for system operation and upgrades.
Instructions for registering the product and reviewing warranty literature.
To Next Page
