MM-013994-001, Rev. J
89
10.33.3 Delete TextLink Messages
Select DEL MAIL with the key to delete ALL messages in the inbox.
10.33.4 View the Current Time
Select TIME with the key to retrieve the current date and time.
10.34 VIEW GPS INFORMATION
If the GPS Speaker microphone is connected to the P7300, you can view your position and satellite
information via the GPS Menu. GPS requires an unobstructed view of the sky and the signal is greatly
diminished inside buildings, tunnels, heavily forested areas, etc. GPS may not work at all under some
conditions, especially in metal enclosures or buildings.
1. Press to access the menu.
2. Press or to scroll through menu until GPS is displayed and press to select.
3. Press or to scroll through available information screens.
10.35 CONTROL AND STATUS SERVICES
The P7300 supports Control and Status services. These services allow the computer application to
monitor and control a radio. The Control and Status Services can be used from a locally-connected
Mobile Data Terminal (MDT) or a network MDT. In some cases, the radio can support both MDTs
simultaneously. However, priority is given to the local MDT.
The Radio Status Service allows an MDT or Fixed End System (FES) to receive real-time status updates
from a radio. An MDT sends Host Attach/Detach messages to the radio as UDP datagrams destined for
the UDP Service Address and Service UDP Port of the radio. All responses and asynchronous reports are
returned to the address and port of the requesting host. Refer to the ECP Control and Status Services
Feature Manual, 14221-7200-6040, for more information on this feature.
To Next Page
Loading...
Need help?
General
