Harris P7300 SERIES - Error Message Reference

MM-013994-001, Rev. J
34
MENU
NAME
RADIO
DISPLAYS
USAGE NOTES
See Previous Page
Site Lock
“Site Lock”
Use or to scroll through sites. Press to select site.
OTP Software
Version
“Software Ver”
Displays OTP software version Press to return to dwell display.
RF Diagnostics
“Diagnostics”
Use or to scroll through RF diagnostics displays. Press
to reset RF
diagnostics counters.
Priority 3 Talk
Group
“Priority 3”
Use or to choose Priority 3 Talk Group. Press to toggle “<” on (selected
)
and off.
Use and to scroll through menus.
9.9 ERROR MESSAGES
This section lists and describes the error messages that may be displayed by the radio during OpenSky
operation.
MESSAGE
DESCRIPTION
NOAUT01
Unspecified MDIS (data switch) error. If condition persists in strong signal
conditions, contact your system administrator.
MDENIED
Unspecified MDIS error. If condition persists in strong signal conditions, contact
your system administrator.
UNAUTH3
Unauthorized IP. The radio network ID has not been added to network.
UNAUTH4
Bad authentication. If condition persists in strong signal conditions, contact your
system administrator.
UNAUTH5
Unsupported authentication. If condition persists in strong signal conditions, contact
your system administrator.
MDISBSY
The MDIS is busy. If condition persists in strong signal conditions, contact your
system administrator.
DUP IP
Duplicate IP.
BADIKEY
Invalid infrastructure public key sequence number (IPKSN).
BADEKEY
Invalid end-system public key sequence number (EPKSN).
UNK MES
Unknown mobile end system (MES); i.e., radio. If condition persists in strong signal
conditions, contact your system administrator.
NOAUT05
MDIS failed mutual authentication. If condition persists in strong signal conditions,
contact your system administrator.
BADMDIS
MDIS failed mutual authentication. If condition persists in strong signal conditions,
contact your system administrator.
MDS BSY
MDIS busy – retry.