MM-013994-001, Rev. J
66
NAME DESCRIPTION
System Scan
Features Off
Indicates the System Scan features are disabled.
Low Battery
Battery voltage has dropped to the point to where the radio is no longer
able to transmit. The radio will still receive calls until the battery is
discharged beyond the point of operation at which time the radio
automatically shuts down.
Receive
Emergency
Indicates an emergency call is being received. This message will be
flashing on line two.
Transmit
Emergency
Indicates an emergency call has been transmitted on this radio. This
message will be flashing on line two.
Volume Level
Indicates the current volume level. The volume level display ranges from
OFF (muted) to 40 (loudest).
Who Has
Called
Indicates an individual call has been received, but not responded to. The
indicator turns OFF if the individual call mode is entered, the system is
changed, or the radio is turned off and then on again.
Unknown ID Indicates an individual call is being received from an unknown ID.
10.7 ERROR MESSAGES
If either of the Error Messages shown below is displayed, the radio is programmed incorrectly or needs
servicing.
DSP ERR
ERR=XXXX
DIG V x
ERR x
Where xxxx is the error code and DSP ERR or DIG V ERR is the message.