Harvia XENIO CX180 User Manual

These instructions for installation and use are
intended for owners of saunas, heaters and control
units, persons in charge of managing saunas,
heaters and control units, and for electricians
responsible for installing heaters and control units.
Once the control unit is installed, these instructions
of installation and use are handed over to the owner
of the sauna, heater and control unit, or to the
person in charge of maintaining them.
CONTROL UNIT HARVIA XENIO (CX180)
Control unit's purpose of use: t
he control unit is
meant for controlling the functions of a sauna
heater. It is not to be used for any other purpose.
Congratulations on making an excellent choice!
本安装与使用说明书 应给予本产品拥有者、负责人或
安装电工阅读。电工安装完成后，应把本安装与使用
说明书，交予本产品拥有者或负责管理人。
HARVIA XENIO 控制器(CX180)
触摸式电热桑拿炉控制器用途:本产品是特意为控制电
热桑拿炉而设计，严禁在其它用途上使用。
注意! 请在使用电热桑拿炉前小心阅读说明书。
祝贺您 明智的选择!
CONTENTS
1. HARVIA XENIO ........................................................... 3
1.1. General .............................................................. 3
1.2. Technical Data .................................................... 3
1.3. Troubleshooting .................................................. 4
2. INSTRUCTIONS FOR USE ............................................. 5
2.1. Using the Heater ................................................. 5
2.1.1. Heater On .................................................. 5
2.1.2. Heater Off .................................................. 5
2.2. Changing the Settings.......................................... 6
2.3. Using Accessories ............................................... 6
2.3.1. Lighting ..................................................... 6
3. INSTRUCTIONS FOR INSTALLATION ............................. 9
3.1. Installing the Control Panel ................................... 9
3.2. Installing the Power Unit .................................... 10
3.2.1. Electrical Connections .............................. 10
3.2.2. Power Unit Fuse Faults .............................. 10
3.3. Installing the Temperature Sensors ...................... 12
3.3.1. Installing the Temperature Sensor WX232 ..... 12
3.4. Resetting the Overheat Protector......................... 14
4. SPARE PARTS .......................................................... 14
目录
1.
HARVIA XENIO 控制器.................................................. 3
1.1. 概要........... ........................................................ 3
1.2. 技术参数............................................................. 3
1.3. 问题解决............................................................. 4
2.
使用及操控 .................................................................. 5
2.1. 使用桑拿炉 .......................................................... 5
2.1.1. 启动桑拿炉 ..................................................5
2.1.2. 关闭桑拿炉 ..................................................5
2.2. 操作及更改设定 ....................................................6
2.3. 操作选配设备 ...................................................... 6
2.3.1. 照明灯 ....................................................... 6
3.
安装指示 .................................................................... 9
3.1. 安装控制器面板 .................................................. 9
3.2. 安装电源控制装置 .............................................. 10
3.2.1. 电源接线 .................................................. 10
3.2.2. 保险丝故障 ................................................ 10
3.3. 感温器安装........................................................ 12
3.3.1. 安装感温器 WX232 ...................................12
3.4. 过热保护器复位.................................................. 14
4.
零件 ........................................................................ 14
中文

Harvia XENIO CX180 Specifications

General

Brand	Harvia
Model	XENIO CX180
Category	Control Unit
Language	English