Selecting metering method
Proceed as follows with the camera in active mode:
1. Press the EXP button on the viewnder.
2. Turn the rear control wheel (in either direction 2a) to successively
access the three choices: Average, Centre Weighted, and Spot 2b.
3. Press Save (DRIVE button) to retain the setting.
Exposure method
Exposure can be controlled either manually or by using one of four
automatic modes. These have the following designations on the grip
LCD:
M – Manual
A – Aperture (priority)
S – Shutter (priority)
P – Program
Pv – Program variable
In each mode you can see both the aperture and the shutter speed
information on the grip LCD and on the viewnder LCD.
In manual mode, aperture is set by the front control wheel and the
shutter speed by the rear control wheel.
To Next Page
Loading...
Need help?
General
