Multi exposure (only active together with lm magazines!)
In multi exposure mode, the camera does not advance the lm a er the rst exposure, only
at the end of the pre-determined number of exposures. e frame options are: 2, 3, 4, 5 and
‘No limit’.
In camera active mode:
1) Press the DRIVE button on the grip.
2) Turn the front control wheel to: Multi exp.
3) Turn the rear control wheel to select the number of frames required.
4) Press Save to store the setting.
5) The LCD will display rstly that no frames have been exposed in the multi-sequence (For
example, in the case of a three exposure setting the display will be Exp:0/3).
6) Press the shutter release button to make the rst exposure.
7) The LCD will display how many frames have been exposed in the sequence (In the case of
a three exposure setting the display will now be Exp:1/3. After the next exposure, the LCD
would then display 2/3 etc)
8) You can change your mind at any time to exit the sequence by pressing the DRIVE but-
ton to advance the lm to the next frame. The camera is then prepared for another new
multi exposure sequence according to the initial setting.
To Next Page
Loading...
Need help?
General
