7. Use Browse/Scroll button to highlight either Yes (to delete) or No (to cancel) then press
OK button to conrm.
Changing settings on the camera menu
ISO and White Balance settings are changed by way of the main camera menu, as follows:
1. Press the MENU button on the grip.
2. Turn the front control wheel until the Digital (screen 5) appears.
3. Press ENTER (DRIVE button on the grip).
4. Turn the front control wheel to access the options, that are:
ISO setting and White balance
5. In ISO Setting turn the rear control wheel to choose an ISO value of 50, 100, 200 or 400.
In White balance turn the rear control wheel to choose between manual, ash, daylight or
tungsten.
6. Press SAVE (the DRIVE button) or half press the shutter release button to save the setting.
7
To Next Page
Loading...
