Please note that the temperature has inuence on the results. At low temperatures the battery
life decreases a lot. For outside shooting you should keep charged batteries in your pocket
(or another warm place) to have them perform at their best.
Transferring images
All shots saved to the Image Bank’s hard disk must be transferred to a computer for viewing,
selecting and processing.
Connecting the Image Bank to a computer
To connect the Image Bank to a computer proceed as follows:
1. Start your computer, launch the FlexColor application and open the Thumbnails window.
2. Connect the Image Bank to the computer using a FireWire cable.
3. Switch on the Image Bank on the On/O button/.
4. Within a few seconds a Contents window is available with thumbnails of all images ready
to load.
Contents window
MAC
or
PC
To Next Page
Loading...
