Hasselblad H1D
5 DIGITAL
ISO and White Balance settings for digtial capture are changed as follows:
1) Press the MENU button on the grip.
2) Turn the front control wheel until the Digital (screen 5) appears.
3) Press ENTER (DRIVE button on the grip).
4) Turn the front control wheel to access the options, that are:
ISO setting and White balance
5) In ISO Setting turn the rear control wheel to choose an ISO value of:
50, 100, 200 or 400.
In White balance turn the rear control wheel to choose between:
manual, ash, daylight or tungsten.
6) Press SAVE (the DRIVE button) or half press the shutter release button to save the setting.
To Next Page
Loading...
